结构完整性工程师
Structural Integrity Engineer
Intertek，一家在ATIC（认证、检测、检验、认证）领域领先的跨国公司，正在寻找经验丰富的结构完整性工程师，负责与运营工厂、改造项目及多个能源资产的翻新项目相关的工作。该职位专注于评估现有设施的结构状况，评估退化情况，验证承载能力，并支持与寿命延长、结构连接和结构可靠性相关的工程决策。
结构完整性工程师在结构评估、载荷评估和与退化相关的结构工程方面提供技术权威，确保所有建议技术上合理，符合国际规范，并符合客户完整性要求。
职责：
- 对非承压结构部件进行结构完整性评估，包括管道支架、平台、人行道、支撑、建筑物、基础和钢结构。
- 评估腐蚀引起的截面损失、变形、振动问题和结构过载状况。
- 对现有结构进行载荷评估（恒载、活载、热载、风载、地震载荷、设备载荷）。
- 评估翻新范围、设备更换和结构连接的结构适用性。
- 仅在适用于结构部件时支持API 579第5/9部分的评估（例如局部减薄区域、类似裂纹缺陷）。
- 审核历史结构图纸、竣工文档和现场测量数据，以验证结构承载能力。
- 评估现有结构在新载荷或修改后的运行条件下的适用性。
- 为翻新工程包、变更管理（MOC）和连接可行性研究提供结构输入。
- 支持临时工程、吊装分析和与施工相关的结构检查。
- 解释检测数据，并将退化机制与结构性能相关联。
- 编制结构评估报告、工程论证和修复、加固或更换的建议。
- 与机械、腐蚀、工艺和检测团队对接，解决数据缺口并确保一致。
- 确保符合欧洲规范、AISC、ASCE、API和客户标准。
要求
- 土木或结构工程学士学位。结构工程硕士学历优先。
- 至少5年作为结构完整性工程师的可证明工作经验。
查看英文原文
Intertek, Multinational Company leader in ATIC (Assurance, Testing, Inspection, Certification) is seeking an experienced Structural Integrity Engineers for upcoming work related to operational plants, brownfield modifications, and revamp projects across multiple Energy assets. This role focuses on evaluating the structural condition of existing facilities, assessing degradation, verifying load capacity, and supporting engineering decisions related to life extension, structural tie-ins and structural reliability.
The Structural Integrity Engineer provides technical authority in structural assessment, load evaluation, and degradation‑related structural engineering, ensuring that all recommendations are technically defensible, compliant with international codes, and aligned with Client integrity requirements.
Responsabilities:
- Perform structural integrity assessments for non‑pressurized structural elements, including pipe racks, platforms, walkways, supports, buildings, foundations, and steel frames.
- Evaluate corrosion‑related section loss, deformation, vibration issues, and structural overstress conditions.
- Conduct load evaluations (dead, live, thermal, wind, seismic, equipment loads) for existing structures.
- Assess structural adequacy for revamp scopes, equipment replacement, and structural tie‑ins.
- Support API 579 Part 5/9 assessments only where applicable to structural components (e.g., local thin areas, crack‑like flaws).
- Review legacy structural drawings, as‑built documentation, and field measurements to validate structural capacity.
- Evaluate use of existing structures for new loads or modified operating conditions.
- Provide structural input to revamp engineering packages, MOCs, and tie‑in feasibility studies.
- - Support temporary works, lifting studies, and construction‑related structural checks.
- - Interpret inspection data and correlate degradation mechanisms with structural performance.
- - Prepare structural assessment reports, engineering justifications, and recommendations for repair, reinforcement, or replacement.
- - Interface with Mechanical, Corrosion, Process, and Inspection teams to resolve data gaps and ensure alignment.
- - Ensure compliance with Eurocodes, AISC, ASCE, API, and Client standards.
Requirements
- Bachelor’s degree in Civil or Structural Engineering. Master’s degree in Structural Engineering is an advantage.
- Minimum 5 years demonstrable experience acting as Structural Integrity Engineer.
- Experience with structural analysis software for assessment‑level calculations
- Chartered Engineer (CEng / PE / EUR Ing) or equivalent.
- API 579 familiarity (Parts 5 & 9) is an advantage.
- Training in structural assessment, Eurocodes, or API/ASME integrity standards.
- Strong understanding of structural analysis principles, load combinations, and code‑based assessment methods.
- Proficiency in evaluating non‑pressurized structural elements: steel structures, concrete structures, pipe racks, platforms, supports, and foundations.
- Ability to assess corrosion, section loss, deformation, vibration, and fatigue‑related issues.
- Familiarity with operational constraints, plant walkdowns, and brownfield engineering practices.
- Working knowledge of integrity management systems and inspection workflows.
Originally posted on Himalayas