电路设计专家
Circuit Design Expert
电路设计专家
薪资：每小时80-130美元
地点：全球，完全远程
职位类型：合同工（每周约15小时）
时间安排：灵活—您可自行选择工作时间和日期，包括周末
我们正在寻找一位技能娴熟的电路设计专家，参与涉及电子硬件、电路仿真、程序化EDA工作流、验证和Python的AI训练项目。
工作内容包括创建、解决、审查和验证与模拟、数字、电源、混合信号或射频电路相关的工程任务。代表性任务可能需要解读电路需求，生成或修改网表或硬件描述，从命令行运行仿真或验证工具，分析结果，并确定设计是否满足其电气和功能约束。
此职位要求有实际电路设计经验，这些设计已进行过制造、发货、集成或流片。仅具有仿真为主的学术经验是不够的。候选人还必须具备使用支持程序化或命令行工作流的工具的经验。
您将从事的工作
- 设计、分析和验证模拟、数字、电源、混合信号或射频电路。
- 将电气需求转化为原理图、网表、模型、HDL、约束或仿真输入。
- 使用命令行可访问的工具运行电路仿真、综合、验证或相关工作流。
- 使用Python生成输入、自动化仿真、运行参数扫描、控制仪器并分析结果。
- 评估电压、电流、功率、增益、带宽、阻抗、噪声、时序、稳定性、热行为和其他相关输出。
- 在适当的情况下执行极限分析、容差分析、最坏情况分析、瞬态分析、频域分析或蒙特卡洛分析。
- 将仿真行为与解析计算和物理测量进行比较。
- 诊断涉及元件选择、寄生效应、布局、电源完整性、信号完整性、热行为、接口或制造的问题。
- 审查AI生成的电路解决方案，识别错误假设、无效配置或不支持的结论。
- 开发可重复的参考解决方案和自动化验证检查。
所需资格
- 电子工程或相关学科的硕士或博士学位；或
- 电子工程学士学位，加上至少1-2年的相关专业电路设计经验。
查看英文原文
Circuit Design Expert
Pay: $80–$130/hour
Location: Global, fully remote
Job Type: Contractor (~15 hours per week)
Schedule: Flexible—you choose the hours and days you work, including weekends if desired
We are looking for a highly skilled Circuit Design Expert to contribute to an AI training project involving electronic hardware, circuit simulation, programmatic EDA workflows, verification, and Python.
The work involves creating, solving, reviewing, and validating engineering tasks related to analog, digital, power, mixed-signal, or RF circuits. A representative task may require interpreting circuit requirements, producing or modifying a netlist or hardware description, running simulations or verification tools from the command line, analyzing the resulting outputs, and determining whether the design satisfies its electrical and functional constraints.
This role requires experience with real circuit designs that were fabricated, shipped, integrated, or taped out. Simulation-only academic experience is not sufficient. Candidates must also have experience with tools that support programmatic or command-line workflows.
What You’ll Work On
- Design, analyze, and validate analog, digital, power, mixed-signal, or RF circuits.
- Translate electrical requirements into schematics, netlists, models, HDL, constraints, or simulation inputs.
- Run circuit simulation, synthesis, verification, or related workflows using command-line-accessible tools.
- Use Python to generate inputs, automate simulations, run parameter sweeps, control instruments, and analyze results.
- Evaluate voltage, current, power, gain, bandwidth, impedance, noise, timing, stability, thermal behavior, and other relevant outputs.
- Perform corner, tolerance, worst-case, transient, frequency-domain, or Monte Carlo analyses where appropriate.
- Compare simulated behavior with analytical calculations and physical measurements.
- Diagnose problems involving component selection, parasitics, layout, power integrity, signal integrity, thermal behavior, interfaces, or manufacturing.
- Review AI-generated circuit solutions and identify incorrect assumptions, invalid configurations, or unsupported conclusions.
- Develop reproducible reference solutions and automated verification checks.
Required Qualifications
- An MS or PhD in Electrical Engineering or a closely related discipline; or
- A BS in Electrical Engineering plus at least 1–2 years of relevant professional circuit-design experience.
- Meaningful experience designing analog, digital, power, mixed-signal, or RF circuits.
- Experience with designs that were fabricated, integrated, shipped, or taped out—not only simulated.
- Practical proficiency with Python.
- Experience with at least one EDA, circuit-simulation, PCB, HDL, synthesis, or verification tool that supports CLI, scripting, text-based inputs, or a programmatic API.
- Strong understanding of circuit behavior, component selection, tolerances, failure modes, and design trade-offs.
- Experience with hardware bring-up, laboratory validation, design verification, or post-fabrication debugging.
- Ability to explain circuit behavior and technical decisions clearly.
Relevant tools may include ngspice, Xyce, Yosys, Verilator, KiCad scripting, SPICE-compatible simulators, HDL simulators, synthesis tools, or equivalent programmatic EDA software. Experience with a comparable CLI-accessible tool is acceptable.
Relevant Python tools may include PySpice, NumPy, SciPy, pandas, Matplotlib, cocotb, instrument-control libraries, EDA APIs, or internally developed automation tools. No single library is mandatory.
Process
- Apply to the role and complete the screening questions.
- Complete an AI interview of approximately 30 minutes.
- Complete a technical assessment, if required.
- Complete the hiring manager review.
Compensation Structure
Compensation is output-based. Experts are paid per task that meets the project specifications. The time required to complete each task may vary depending on the expert’s experience and workflow.
Minimum submission requirements apply.
Start Timeline & Availability
· We typically fill roles within 48 hours and are looking for experts who are ready to begin immediately. If selected, you will be expected to start your first task within 24–48 hours of completing onboarding.
Originally posted on Himalayas