吹塑旅行维护机械师/技术员，全国出差
BLOW MOLD TRAVEL MAINTENANCE MECHANIC/TECHNICIAN, NATIONWIDE TRAVEL
职位简介：
我们的吹塑模具维护机械师/技术员将对吹塑生产设备、工厂吹塑模具设备和设施进行维修、预防性和纠正性维护。
该职位需要100%出差，但技术人员可以居住在美国任何地方。
申请人必须是美国公民并持有有效的美国驾照。
必须具备吹塑模具维护或吹塑模具技术员经验
核心职责与要求：
- 确保符合公司和工厂的安全标准，以及监管机构发布的适用法律和法规
- 安装、调整和维修吹塑模具机、修边机、冷却床、堆叠机和其他相关设备
- 进行模具、颈具更换，以及销钉和其他设备的更换
- 检查并更换气动和液压软管
- 检查、重建并更换阀门和泵
- 对所有相关设备进行预防性维护
- 保持机器在最佳加工状态
- 进行焊接、制造和维修各种机器
- 排查故障，定位根本原因并维修吹塑模具、包装机和支持设备
- 可能操作吹塑模具或注塑机
- 频繁与其他部门沟通
- 其他由管理层指派的任务
任职资格：
以下要求为该职位的最低要求。如有必要，可对符合条件的残疾人进行合理调整，以使其能够安全地执行该职位的核心职责，除非此类调整会给公司带来过度负担。
教育和/或经验：
- 高中文凭、GED或技术/机械认证。
- 必须具备吹塑模具维护或吹塑模具技术员经验。
- 具备Uniloy、Rocheleau、Bekum、Graham和Wilmington的维修和维护经验。
- 具备KuKA和Fanuc机器人经验者优先
证书、许可证、注册：
- 必须持有有效的美国驾照。
- 可能需要当前的OSHA叉车操作证书。
身体要求：
此处描述的体力要求代表员工成功执行该职位核心职责所必须满足的要求。如有必要，可对符合条件的残疾人进行合理调整，以使其能够安全地执行该职位的核心职责，除非此类调整会给公司带来过度负担。在履行该职位职责时，员工可能需要长时间站立、行走、搬运重物等。
查看英文原文
JOB SUMMARY:
Our BLOW MOLD MAINTENANCE MECHANIC/TECHNICIAN will perform repairs, preventative and corrective maintenance on blow molding production machinery, plant blow mold equipment and facility.
This position requires 100% travel, but technicians may live anywhere in the United States.
Applicants must be a United States citizen and hold a valid U.S. drivers license.
Blow Mold maintenance or blow mold technician experience is REQUIRED
ESSENTIAL DUTIES & RESPONSIBILITIES:
- Ensure compliance with corporate and plant safety standards and with applicable laws and regulations issued by regulatory agencies
- Install, adjust and repair blow mold machines, trimmers, cooling beds, palletizer and other related equipment
- Perform mold, neck tooling changes, pin and other equipment changes
- Inspect and replace pneumatic and hydraulic hoses
- Inspect, rebuild and replace valves and pumps
- Perform preventive maintenance on all related equipment
- Maintain machines in optimal processing condition
- Weld, fabricate, and repair various machines
- Troubleshoot, locate root problems and repair blow mold, baggers & support equipment
- May operate blow mold or injection machines
- Communicate with other departments on a frequent basis
- Other duties as assigned by management
QUALIFICATIONS:
The requirements listed below are minimum requirements for the job. Reasonable accommodations may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job, unless such accommodation would impose an undue hardship on the Company.
EDUCATION and/or EXPERIENCE:
- High school diploma, GED, or technical/mechanical certification.
- Blow Mold maintenance or blow mold technician experience is REQUIRED.
- Uniloy, Rocheleau, Bekum, Graham, and Wilmington repair and maintenance.
- KuKA and Fanuc Robotics experience a plus
CERTIFICATES, LICENSES, REGISTRATIONS:
- Must hold a valid US drivers license.
- May require a current OSHA forklift certification.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job, unless such accommodation would impose an undue hardship on the Company. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee frequently is required to lift and/or move up to 50 pounds.
Originally posted on Himalayas