高级电气工程师
Sr. Electrical Engineer
职位描述
1. 职责范围：
研究并开发概念设计，准备详细工程解决方案，与项目团队协调所有分配的修改（项目），处理与专业范围相关的各种任务。作为内部/分包工程的关键联系点。按照定义的要求、行业最佳实践和合同协议审查工程研究。
2. 项目管理：
协调专业审核和批准设计，并与承包商/供应商就公司要求和规范进行接口。
审查并批准所有相关技术文件并与上级协调。
在投标人提案的技术评估阶段审查并提供关于布局、现场准备、电气方案、详细电气设计图、单线图、电气数据表等的建议，以评估技术能力并确保符合项目规范。
确保项目电气工程设计和工程活动按照规范执行，在预算内，符合合同工作范围，并满足时间进度。
协调并为施工活动提供工程支持，包括确保为施工所需的工程细节得到提供。
审查并批准修改（项目）的竣工文件。
设计与工程：
作为研究准备的一部分，进行现有和新设施的现场验证和数据收集。
提供各种电气工程方面的研究，如负载研究、电压降、电缆尺寸选择、负载流分析、电机启动、短路分析、电气设备选择、保护协调、气体和粉尘危险区域分类、照明/照度计算、防雷系统、接地系统、阴极保护、伴热等。
与工艺、施工、维护、检查、运行、可靠性等部门代表协商，确保设计符合目标。
按照最佳工程实践执行验证、研究和详细设计，并在成本、施工简便性、可操作性和可维护性、HSSE等方面进行优化。
编制详细的工程图纸，如单线图、布局、平面图、电源电路图、回路图、电缆路径和接线图等。
根据最新适用标准进行电气设备尺寸选择。
选择
查看英文原文
Job Description
1. JOB SCOPE:
Study and develop conceptual designs, prepare detailed engineering solutions, plan, monitor and coordinate all assigned modifications (projects) with project team for a wide range of tasks related to discipline scope. Act as a key focal point for in-house/subcontracted engineering. Review of engineering studies conducted in line with defined requirements, industry best practices and contractual agreements.
2. PROJECT MANAGEMENT:
Coordinate discipline review and approval of design and interfaces with Contractor/Vendor on Company requirements and specifications.
Review and approve all related technical documents and coordinate with superiors.
Review and advice on layouts, site preparation, electrical schemes, detailed electrical design drawings, Single Line Diagram, electrical data sheets, etc. during technical evaluation stage of bidders proposals to assess technical capability and ensure compliance with project specifications.
Ensure projects electrical engineering design and engineering activities are executed according to specification, within budget, with the contract scope of work and meets time schedules.
Coordinate and provide engineering support for construction activities, including the assurance that engineering details required for construction are provided.
Review and approve modifications (projects) as-built documents.
DESIGN AND ENGINEERING:
Conduct site verification and data collection of existing and new facilities as part of study preparation.
Provide study in various aspects of electrical engineering such as load study, voltage drop, cable sizing, load flow analysis, motor starting, short circuit analysis, electrical equipment selection, protection coordination, gas and dust hazardous area classification, lighting/Illumination calculations, lightning protection systems, grounding systems, cathodic protection, heat tracing, etc.
Consults with representatives of Process, Construction, Maintenance, Inspection, Operation, Reliability, etc. to ensure that designs meet the objectives.
Execute verification, studies and detail design following best engineering practices and optimization in term of cost, construction simplicity, operability and maintainability, HSSE, etc.
Develop detailed design drawings such as Single Line Diagrams, layouts, plans, power circuit diagrams, loop drawings, cable routing and wiring diagrams, etc.
Sizing of electrical equipment based on latest applicable standards.
Selection of electrical equipment within gas/dust classified zones.
Prepares supply and services purchase specifications.
Prepares MTOs and BOQs.
Prepares Scope of Work and technical specification for electrical subcontracts.
Prepares technical documentation for electrical material requisition.
Carry out technical evaluations.
QUALIFICATIONS
Minimum Qualifications:
Bachelors degree in discipline Engineering.
7.2 EXPERIENCE
Minimum Experience for discipline Engineer position:
8 years of experience in design/engineering in the field of Oil and Gas/Petrochemical industry.
Good knowledge of discipline design/engineering with sufficient experience in different discipline areas.
Minimum Experience for discipline Senior Engineer position:
12 years of experience in design/engineering in the field of Oil and Gas/Petrochemical industry.
In-depth knowledge of discipline design/engineering with wide experience in multi-discipline areas.
7.3 SKILLS
Job-Specific Skills (Technical):
Knowledge of electrical design/engineering.
Familiar with industrial automation systems.
Familiar with electrical/automation equipment packages.
Knowledge of network transient analysis studies using ETAP Software
Lighting calculation and studies using DIALUX lighting/Illumination software
Familiar with gas and dust hazardous area classifications
Familiar with Industrial/International Codes and Standards IEC, IP 15, NFPA 70, etc.
Familiar with SAP system
Originally posted on Himalayas